![]() ![]() Then open or if your device does not understand bonjour protocol and go to Global Settings WLAN. So it might take a few minutes for changed settings to be seen correctly. The server only talks once a minute with os to get latest wifi status. So check your WLAN access points and select RepetierServer and connect using the password 12345678. Initially the image is configured to run as access point. The last solution is using a smartphone or laptop with WLAN. It will get a IP from your DHCP server and you can connect to it using If you have a working touchscreen already, you can configure your WLAN directly on the display. The way that always works is using an ethernet connection. The first thing to do is connecting the Raspberry Pi to your internet. Later it will directly boot into the normal front end. So what you see is the registration page instead. ![]() At this point you have probably no internet connection and also no license entered (required for printer front end). If you have a HDMI display connected, you will already see the front end. Shut down any running instance and place your newly created image in your Raspberry Pi and boot. Tip: You can also set the wifi connection parameter in windows, see Search the line lcd_rotate=2Īnd set the rotation value: 0 is no rotation, 2 = 180°, 1 = 90°, 3 = 270°. If you have a screen connected, also check config.txt. Edit the file “repetier-image-setup.txt” to disable GUI. On windows you see only the /boot directory. If you have no screen on your pi, you can already disable that. To copy the file to your SD card, follow the steps described here: Also bigger cards live longer as we have more blocks to write to. Our preferred size is 32 GB, which offers a good compromise between space and price. On a 4 GB card you have only 2 GB free space left, so a bigger card is a good idea. For this you need a 4 GB SD card or bigger. img file, which you need to copy to your SD card. Installing the ImageĪfter you have downloaded the image, you need to unpack the zip file. Also a cheap usb cable with thin wires can cause voltage loss. Use a solid 3A power supply, best with 5.1 V output. If it does not receive stable 5V, you may experience stability issues like bad connections or temperature errors. V22 New linux kernel 5.4.51, detect wifi driver crash, up to 3 usb sticks will automount.V21 New wifi management, more checks, armhf server as default.V20 Increased boot partition to fit Raspberry Pi 4 image as well.V19 Fixed setting static routes for wired connection.V18 Access point handling changed, 0.92.2 server version.V17 Fixed wifi problem, 0.92.1 server version.V16 Fixed webcam scripts to new V4L format.V15 Now based on Raspbian buster, Raspberry Pi 4 support, fixed USB stick mounting, chinese chars working.V13 removed dtoverlay dwc2 from /boot/config.txt as that seemed to make problems with bandwidth.V12 Fixes usb automount problems added with stretch.V11 Ready for Raspberry Pi ZeroW on a Prusa MK 3 (or any Rambo Einsy board), wifi improvements.V10 Fixed problems with raspi cam not starting.Assigns ports now by webcam name so multiple webcams get always the same port. V8 based on stretch, first Raspberry Pi 3+ compatible image.V7 wifi management improved, packages updated.V6 fixes wifi issues, adds screensaver control.Now allows setting resolution and frame rate from printer webcam configuration. V4 fixed a problem with network-manager preventing connections to network to work.0.80.1 will ignore auto configuration from V2 image but server will still work. V3 introduced a new webcam system, incompatible with V2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |